Sales Assistance »
Lumicanopy | Illuminate Your Message

  • Lumicanopy

    Illuminate Your Message

    With the Lumicanopy’s LED lighting, your illuminated signage will never be affected by hot spots from light bulbs. It’s a maintenance-free solution that lasts for years and contains no harmful substances. LED lighting creates a backlight for eye-catching graphics to promote everything from individual products to the retailer itself. Extremely easy-to-change graphics means store associates can replace signage quickly and simply. Graphics slide in from single unit end caps.

    • Large format signage seen clearly across the store
    • Bright, colorful, lighted, attention-getting signage
    • Available in multiple heights
    • Uniform light distribution
    • Maintenance-free LED emits virtually no heat and consumes little power
    • Easily installs on end caps or inline shelving runs
    • Ability to change graphics in seconds
    • UL listed

  • Gallery

  • Components for Lumicanopy

    Reveal/Hide Components

     Lumisheet Metal Canopy

    • True photographic/duratrans film may be used in front of panels to create illuminated signage (8 mil recommended)
    • Size for graphics: Nominal Height x Nominal Width - .0625" (6mm) Example: 12" x 47.9375" (305 mm x 1218 mm)
    • Set viewable area of graphics with recommended 1" padding to avoid top and bottom lip of the Metal Canopy
    • Graphics not provided by Madix
    Part Number: LSMC(NW)(NH)
    • LS..... Lumisheet
    • MC.....Metal Canopy
    • NW.....Nominal Width 24", 30", 36", 48" (610 mm, 762 mm, 914 mm, 1219 mm)
    • NH.....Nominal Height 06", 12", 18", 24" (152 mm, 305 mm, 457 mm, 610 mm)
    LSMC(NW)(NH)-Lumisheet Metal Canopy

     Lumisheet Metal Canopy Bracket

    • Order one bracket per upright using Lumicanopy display
    Part Number: LSMCB(ND)
    • LS..... Lumisheet
    • MCB..... Metal Canopy Bracket
    • ND..... Nominal Depth 06" to 24" in 2" increments (152 mm to 610 mm in 51 mm increments)
    LSMCB(ND)-Lumisheet Metal Canopy Bracket

     Lumisheet Sign Metal Canopy End Cover

    • Completes the end of a Lumicanopy run
    • Order one left and one right for a pair
    • Part is optional
    Part Number: LSMCEC(ND)(NH)(HAND)
    • LS..... Lumisheet
    • MCEC.....Metal Canopy End Cover
    • ND.....Nominal Depth 06" to 24" in 2" increments (152 mm to 610 mm in 51 mm increments)
    • NH.....Nominal Height 06", 12", 18", 24" (152 mm, 305 mm, 457 mm, 610 mm)
    • HAND..... LH=Left, RH=Right
    LSMCEC(ND)(NH)(HAND)-Lumisheet Sign Metal Canopy End Cover

     Lumisheet Surface Canopy

    • True photographic/duratrans film may be used in front of panels to create illuminated signage (8 mil recommended)
    • Size for graphics: Nominal Height x Nominal Width - .0625" (6mm) Example: 12" x 47.9375" (305 mm x 1218 mm)
    • Set viewable area of graphics with recommended 1" padding to avoid top and bottom lip of the Metal Canopy
    • Graphics not provided by Madix
    Part Number: LSSC(NW)(NH)-R
    • LS..... Lumisheet
    • SC..... Surface Canopy
    • NW.....Nominal Width 24", 30", 36", 48" (610 mm, 762 mm, 914 mm, 1219 mm)
    • NH.....Nominal Height 06", 12", 18", 24" (152 mm, 305 mm, 457 mm, 610 mm)
    • R..... Reflector
    LSSC(NW)(NH)-R-Lumisheet Surface Canopy
    Order necessary transformer separately. Spider Cables connect multiple surfaces to a single transformer (see below).

     Spider Cables for LED Products

    • LSS2WC and LSS6WC Spider Cables have connections approximately 6" (152 mm) OC and each lead is approximately 6" (152 mm) long
    • LSS4WC Spider Cable has 60" (1524 mm) leads, 60" (1524 mm) OC
    • Spider Cables can be utilized to connect multiple surfaces or backs to a single transformer
    • Refer to transformer information for capacities
    Part Number: LSS(OPT)WC
    • LSS..... Spider Cables for LED Products
    • OPT..... 2 = 2 Connections 4 = 4 Connections 6 = 6 Connections
    • WC..... Wire Connectors
    LSS(OPT)WC-Spider Cables for LED Products